Lenze I95AE222F Mounting And Switch-On Instructions

Terminal data
Rated power P
r
ated
kW 0.37 ... 1.5
Connecon descripon Mains connecon
Connecon X100
Connecon type Pluggable
Max. cable cross-secon mm² 2.5
Max. cable cross-secon AWG 12
Stripping length mm 8
Stripping length in 0.3
Tightening torque Nm 0.5
Tightening torque lb-in 4.4
Required tool Screwdriver 0.5 x 3.0
Rated power P
r
ated
kW 0.37 ... 1.5
Connecon descripon PE connecon
Connecon PE screw
Max. cable cross-secon mm² 6
Max. cable cross-secon AWG 10
Stripping length mm 10
Stripping length in 0.4
Tightening torque Nm 2
Tightening torque lb-in 18
Required tool Torx key 20
Rated power P
r
ated
kW 0.37 ... 1.5
Connecon descripon Motor connecon
Connecon X105
Connecon type Pluggable
Max. cable cross-secon mm² 2.5
Max. cable cross-secon AWG 12
Stripping length mm 8
Stripping length in 0.3
Tightening torque Nm 0.5
Tightening torque lb-in 4.4
Required tool Screwdriver 0.5 x 3.0
The terminal data for the terminal X1 can be found under:4Basic Sa
fety - STO ^ 161
The terminal data for the terminals X82 and X83 can be found under: 4Terminal data ^ 165
Electrical ins
tallaon
Mains connecon
1-phase mains connecon 230/240 V
136

Lenze I95AE222F Specifications

General

Brand	Lenze
Model	I95AE222F
Category	Inverter
Language	English