Lenze IoT Gateways x510 LAN - Commissioning; Operating Interfaces and Conditions

Commissioning
Operang interfaces
• X4 Remote Plaorm
Condions
• The mechanical and electrical installaon of the IoT Gateway x500 is completed.
• The IoT Gateway x500 is supplied with voltage.
• The diagnoscs of the IoT Gateway x500 does not show any interference.
Commissioning
1. Create account
Create an account on the X4 Remote Plaorm and congure your own IoT user and company
account at hps://iot.lenze.digital/login.
2. Congure IoT Gateway x500
Create the conguraon le for the IoT Gateway x500 on your account.
Select Tools > Start conguraon.
Start the wizard. Save the conguraon le to the USB data carrier included in the scope of
supply using the le name router.conf.
3. Connect IoT Gateway x500 with the cloud
Plug the USB data carrier into the USB port.
The IoT Gateway x500 registers on the X4 Remote Plaorm and sets up a safe VPN connecon .
Commissioning