Communication manual 8400 motec PROFINET
About this documentation
Conventions used
8 L EDS84DMOTPNET EN 2.0 - 11/2011
1.2 Conventions used
This documentation uses the following conventions to distinguish different types of
information:
Type of information Writing Examples/notes
Numbers
Decimal Standard notation Example: 1234
Hexadecimal 0x[0 ... 9, A ... F] Example: 0x60F4
Binary
• Nibble
In inverted commas
Point
Example: ’100’
Example: ’0110.0100’
Decimal separator Point The decimal point is generally used.
Example: 1234.56
Text
Program name » « PC software
Example: Lenze »Engineer«
Window Italics The Message window... / The Options dialog box...
Control element Bold The OK button... / The Copy command... / The
Properties tab... / The Name input field...
Sequence of menu
commands
If the execution of a function requires several
successive commands, the individual commands are
separated from each other by an arrow: Select the
command File
Open to...
Hyperlink Underlined
Optically highlighted reference to another subject
which is activated with a mouse-click.
Symbols
Page reference ( 8) Optically highlighted reference to another page
which is activated with a mouse-click.
Step-by-step instructions
Step-by-step instructions are indicated by a
pictograph.
To Next Page
Loading...
