Accessories (overview)
Communication modules
Ethernet interface
8
383
EDS94SPP101 EN 10.2
Connections
Pos. Description
X245 Connection for the external supply of the communication module
Design: Plug connector with spring connection, 2−pole
X246 EtherCAT input (IN)
Design: RJ45 socket according to IEC 60603−7
X247 EtherCAT output (OUT)
Design: RJ45 socket according to IEC 60603−7
Displays
LED
Description
Pos. Colour Condition
MS green on
The communication module is supplied with voltage and has a
connection to the standard device.
blinking
200 ms
200 ms
The communication module is supplied with voltage but has no
connection to the standard device (standard device is either switched off,
in the initialisation phase, or not available).
ME red on
An error in the communication module has occurred.
RUN green
off The communication module is not active on the fieldbus or is in the "Init"
status.
blinking
200 ms
200 ms
"Pre−operational" status active:
Access to parameters and objects possible.
No process data exchange
blinking once
(single flash)
1000 ms
200 ms
200 ms
1000 ms
"Safe−operational" status active:
The data are not active in the standard device yet.
on
The communication module is in the "Operational" status.
ERR red
off No error
blinking
200 ms
200 ms
The configuration is invalid/faulty.
blinking once
(single flash)
1000 ms
200 ms
200 ms
1000 ms
A state change that was not requested has occurred. (The slave
application has changed the EtherCAT status independently.)
Synchronisation error (The EtherCAT node changes to the
"Safe−operational" status automatically.)
blinking twice
(double flash)
200 ms
200 ms
1000 ms
200 ms
200 ms
200 ms
200 ms
An "Application Watchdog Timeout" or a "Sync Manager Watchdog
Timeout" has occurred.
DE red on
The communication module is not accepted by the standard device, or
the standard device is not active. (See notes in the documentation for the
standard device.)
L/A green on
Physical EtherCAT connection is available.
flickering
50 ms
Data are exchanged via EtherCAT.
B red off This LED is not used.
To Next Page
Loading...
