Lenze P500 series - 8 Index

Index 8
35
Lenze ¯ BA_p500 ¯ 3.0
8 Index
0 ... 9
24 V connection, 31
A
Air humidity, 22
Air humidity/temperature
diagrams , 23
Ambient conditions
− air humidity/temperature diagrams,
23
− climatic, 22
− mechanical, 22
− site altitude, 22
Application as directed, 15
Approval, 22
C
Cleaning, 34
Communication interface (MC
card), 33
Conformity, 22
Connecting voltage supply (24 V),
31
Connection plan, 31
Controls, 19
D
Danger
− Short circuit, 29
− Static discharge, 29
Definition of notes used, 7
Device, radio interference, 11
Device features, 16
Device overview, 19
Device protection, 22
Diagnostic LED, 20
Dimensions, 23, 26
Displays, 19
Disposal, 10
E
Earthing (EMC−compliant wiring),
30
Electrical data, 24
Electrical installation, 29
− Communication interface (MC card),
33
− Connecting voltage supply (24 V), 31
− Connection plan for voltage supply,
31
− EMC−compliant wiring, 30
− EtherCAT interface, 32
− Ethernet interface, 32
− Important notes, 29
− Interfaces for peripheral devices, 32
− Mains connection (24 V), 31
− SD card interface, 33
− USB interface, 33
Electrical isolation, 22
EMC, 22
EMC−compliant wiring, 30
Enclosure, 22
Ergonomics, 11
Error behaviour, 11
EtherCAT interface, 32
Ethernet interface, 32
F
Fault, behaviour, 11
G
General data, 22
I
Identification, 17
Installation, electrical, 29
− Communication interface (MC card),
33
− Connecting voltage supply (24 V), 31
− Connection plan for voltage supply,
31
− EMC−compliant wiring, 30
− EtherCAT interface, 32
− Ethernet interface, 32
− Important notes, 29
− Interfaces for peripheral devices, 32
− Mains connection (24 V), 31
− SD card interface, 33
− USB interface, 33
Installation, mechanical, 25
− Dimensions and mounting
clearances, 26
Insulation resistance, 22
Interfaces for peripheral devices,
32
Interference emission, 22
L
LED status displays, 20
M
Mains connection (24 V), 31
Maintenance, 34
− Cleaning, 34
− Regular checks, 34
Mass, 23
Mechanical data, 23
Mechanical installation, 25
− Dimensions and mounting
clearances, 26
Mounting clearances, 26
Mounting conditions, 23
Mounting cutout, 27
Mounting place, 23
Mounting position, 23