Lenze SX-1 - Variable and Position Jump Instructions

_____________________________— 8.2.2
SKVddd = vvvvv.vvv
Meaning:
Add the value vvvvv.vvv to the present value ot Vddd.
Variable number V: ddd = 0 ... 255
Value = vvvvv = -99999.999 ... +99999.999
IF Vddd > Veee Lvv
Meaning:
lt Variable Vddd is greater than Variable Veee, then continue Program at Label Lvv.
Variable number V:ddd=0...255
Variable number V: eee = 0 ... 255
Number ot Label L: vv = 0 ... 99
IF Vddd <Veee Lvv
1 Meani ng:
lt Variable Vddd is smaller than Variable Veee, then continue Program at Label Lvv.
Variable number V: ddd = 0 ... 255
Variable number V: eee = 0 ... 255
Number of Label L: vv = 0 ... 99
IF Vddd = Veee Lvv
Meaning
lt Variable Vddd is equal to Variable Veee, then continue Program ot Label Lw
Variable number V: ddd = 0 ... 255
Variable number V: eee = 0 ... 255
NumberotLabelL:vv =0...99
IF > Vddd Lvv
IF<VdddLvv
Meaning:
Jump to Label Lvv if the position value in Vddd is > or < the Actual Position.
Variable number V: ddd = 0 ... 255
Numberof Label L:w =0.99
8/17 —
Lanze