Lenze SX-1 - Touch Probe and STOP Instructions

< 8.2.2
PTP Vddd
Meaning:
Ihe PTP Vddd instruction, in contrast with the PTP Vddd W = Veee instruction, specities
no „window“ torthe positioning distance. This means that after the start of positioning, the
first TP signal is awaited. lt the TP input is not received, the Flag F96 is set.
STP Vddd = ISTPOS
Meaning:
Ihe Actual position is read into Variable Vddd during positioning: the moment this occurs
is determined by the TP input.
Flags F95 and F96 are set as tor other TP instructions.
SET SOLLP = Vddd
Meaning:
The Reterence position is read trom Variable Vddd. Ihe aim position can be changed
during a positioning movement. lt the aim position is already passed, the axis reverses to
lt. Program execution continues after reaching the positiön aimed tor.
SET Vddd = OVR
Meaning:
The analog value is read trom the A/D converter into Variable Vddd. The analog value can
Iie in the range between 0 (-10V) and 4095 (+10V).
Condition:
The Analog Override option module must be inserted into the Feedback Module‘
8/20
Lanze