Lenze SX-1 - Variable Data Entry and Saving

8.4 ______
6. Enterwith:
Hint:
lt an entry is invalid (too small or too large), then it is brietly displayed and the ‚~
entry ignored.
The Variable data are only held in the butter memory, and must be re-entered when the
control is switched on again.
7. Save
SAVE
By using the SAVE key, the Variable data are loaded into EEP ROM. When the control
is switched on again, the Program uses the SAVED data.
Data entry may be performed whilst the Program is running.
8/32
Lanze