LEO JAYMZ LB-400 - Other Hints

To Next Page

To Previous Page

Setup

4.2

4.3 Intonation

4.4 Finish the assembling

String action

The goal here is to make sure that all string heights are

equal in distance from the bottom of the string to the fret.

To adjust the saddles' height by 0.059" allen wrench, and

the string height as the program as below:

Setting a bass guitar's intonation can be a painful process

but is well worth spending the time getting right.

1. To start, make sure all the strings are in tune - you will

need to retune each string everytime you make an

adjustment with your screwdriver.

2. Next, play a note at the 12 fret. You will notice that this

note will be either sharper or flatter than the open string.

3. Turn the screw that goes through the bridge into the saddle either clockwise (sharper)

or counterclockwise (flatter) - remember to make small adjustments. Your goal is to get

the 12th fret in perfect tune. As you continue this process keep re-tuning the open

string with a quality tuner.

LB -400Bass DIY Kit

Screw the back cavity and truss rod cover, find the right angle for install it almost no

any gap between the cover and the cavity. Install the output jack, control knob, and

strap button.