To Next PageTo Next Page
Need help?Do you have a question about the LEOFOTO LH-25 and is the answer not in the manual?
General| Brand | LEOFOTO |
|---|---|
| Model | LH-25 |
| Category | Camera Accessories |
| Language | English |
The plate that attaches to the camera for quick mounting and removal.
Knob used to secure the quick-release plate onto the ball head.
A groove designed to prevent the camera from accidentally slipping off.
Controls both the ball head movement and the panning base rotation.
A specific notch for camera positioning adjustments.
The base of the ball head that allows for smooth panning movements.
The UNC3/8"-16 threaded hole for mounting the ball head.
Secure the ball head onto a tripod or other gear using the UNC 3/8"-20 stud.
Loosen the clamp screw, mount your camera, and then lock the clamp.
Loosen the main lock knob, adjust the camera, then lock the knob.
Lock the main lock knob securely and begin the shooting process.
Avoid using any extra lubrication on the ball head components.
Prevent the ball head from getting dirt, mud, or sand on it.
Blow off dust or sand, or wipe with a dry cotton cloth.
Rinse with a wet cloth and dry thoroughly if exposed to mud or saltwater.
The ball head is designed to work between -30°C to 60℃.
It is advisable to loosen the knobs when not using the ball head for extended periods.
Ensure camera security by holding or removing it when moving the tripod or ball head.
Includes a 7-day money-back guarantee and a 1-year standard warranty.
