Need help?Do you have a question about the Leupold THE OFFICIAL and is the answer not in the manual?
General| Magnification | 3-9x |
|---|---|
| Objective Lens Diameter | 40mm |
| Tube Diameter | 1 inch |
| Reticle | Duplex |
| Adjustment Click Value | 1/4 MOA |
| Exit Pupil | 13.3-4.4mm |
| Waterproof | Yes |
| Fogproof | Yes |
| Shockproof | Yes |
Diagram and list identifying the main components of the riflescope.
Steps for mounting the scope using bases and rings on the firearm.
Procedure to find the optimal eye relief position for rifles and shotguns.
Procedure to find the optimal eye relief position for handgun scopes.
Final steps to secure the scope and check alignment after mounting.
Instructions on how to adjust the reticle focus for a clear aiming point.
Using a collimator to bore-sight the scope before live firing.
Step-by-step guide for traditional bore-sighting using the firearm's barrel.
Using three-shot groups on the range to make final sight-in adjustments.
Instructions for micrometer-style windage and elevation adjustments.
Explanation of special dials for rapid adjustment to specific distances.
Repositioning adjustment dials to zero after the scope has been sighted-in.
Recentering adjustments for balanced travel and optimal performance.
Using reticle features to estimate range on specific Leupold scope models.
Information on scopes with factory-set parallax correction distances.
Benefits and use of scopes with adjustable parallax settings.
Step-by-step guide to replace the battery for the illuminated reticle.
Proper cleaning procedures for Leupold scope lenses.
Maintenance guidelines for windage, elevation, and eyepiece adjustments.
Maintenance for scope seals, exterior finish, and power selector rings.
Maintenance requirements for the adjustable objective and side parallax dials.
Details of the two-year warranty for electronic components in Leupold scopes.
To Next Page
