To Next PageTo Next Page
Need help?Do you have a question about the Leuze electronic DDLS 500 Series and is the answer not in the manual?
General| Light source | Laser diode |
|---|---|
| Output Signal | Analog, Digital |
| Power Supply | 10 ... 30 VDC |
| Protection Class | IP67 |
| Wavelength | 650 nm |
| Housing material | Metal |
| Resolution | 1 mm |
| Accuracy | ±5 mm |
Multilingual warnings and standards for laser class 1M operation.
Multilingual warnings and standards for laser class 1M operation.
Detailed physical dimensions and mounting information for the device.
Pin assignment for POWER and BUS connectors.
Defines the proper application and purpose of the DDLS 500 series.
General safety standards and state-of-the-art compliance for the system.
Identifies improper uses and scenarios where liability is exempted.
Prerequisites for personnel performing installation and operation.
Details on emitted laser radiation, wavelength, and power.
Warnings against direct observation using optical instruments.
Explanation of model designation and part number code structure.
Information on the optional alignment laser and its laser class.
Instructions for mounting the device, referring to technical description.
Safety notices and requirements for electrical connection.
Notes on UL applications and Protective Extra Low Voltage (PELV).
Default IP addresses for DDLS 508i/548i and resetting procedure.
Details on light source, laser class, wavelength, and impulse duration.
Information on Ethernet transmission rate and protocols.
Housing, connection technology, degree of protection, and dimensions.
Operating and storage temperature, conformity standards (CE, CDRH).
