Need help?Do you have a question about the Leuze AMS 358i and is the answer not in the manual?
General| Resolution | 0.1 mm |
|---|---|
| Protection class | IP67 |
| Housing material | Aluminum |
| Interface | RS-232 |
| Supply voltage | 10 ... 30 VDC |
| Operating temperature | -10 ... +50 °C |
| Laser class | 1 |
| Laser type | Infrared laser |
| Response time | < 1 ms |
| Storage temperature | -20 ... +70 °C |
Explains symbols used in the manual.
States compliance with EU and US safety standards.
Explains how the AMS 358i calculates distances and its applications.
Specifies the AMS's purpose and areas of application.
Defines improper uses of the device.
Defines requirements for personnel installing and operating the device.
Outlines conditions under which the manufacturer is not liable.
Warnings and precautions regarding laser radiation.
Instructions for mounting the device and reflector.
Steps for connecting the power supply.
How to read and change data/parameters via the display.
Steps for commissioning the device with EtherNet/IP.
Performance data, electrical, optical, and interface specifications.
Provides physical dimensions and mounting points of the AMS 358i.
Lists different AMS 358i models and their features.
Guidelines for safe storage and transport of the device.
Instructions for physically mounting the laser measurement system.
Details on using an optional bracket for mounting.
Guidelines for mounting multiple AMS 358i units in parallel.
Mounting considerations for AMS 358i with DDLS optical data transmission.
Procedures for mounting with a laser beam deflector unit.
General information on using Leuze reflective tapes with the AMS 358i.
Provides technical specifications for self-adhesive, carrier plate, and heated tapes.
Visual representations of reflective tape dimensions.
Recommendations for choosing reflector size based on measurement range.
Instructions for correctly mounting various types of reflectors.
Safety precautions before and during electrical connection.
Details on power supply and I/O pin assignments.
Pin assignment for the EtherNet/IP BUS IN connection.
Pin assignment for the EtherNet/IP BUS OUT connection.
Pin assignment for the service interface.
Overview of the physical layout of the device's control panel.
Explains status indicators and how to operate the device.
Details on status and warning messages shown on the display.
Explains the meaning of different Power and Net LED states.
Describes the function of each button on the control panel.
Detailed overview of the device's menu structure and options.
Configuration options for device parameters and network settings.
How to change the display language.
Access to service-related functions like diagnosis.
Describes operational procedures, like parameter enable.
Introduction to EtherNet/IP communication protocol.
Supported network topologies for EtherNet/IP.
Procedures for assigning IP addresses to the device.
Classifies the AMS 358i within EtherNet/IP communication standards.
Role of the EDS file in communication and configuration.
Details on the physical connections for EtherNet/IP.
Information about the Electronic Data Sheet file.
Steps for configuring on Rockwell PLCs without EDS support.
Steps for configuring on Rockwell PLCs with EDS support.
Practical examples for configuring with RSLogix 5000.
In-depth explanation of the EDS file structure and parameters.
Accessing service and diagnostic information via the device display.
Details on ring memory status messages and their meanings.
Using diagnostic functions for device evaluation.
Accessing advanced diagnostic information for internal use.
Common errors and their potential causes and solutions.
Troubleshooting guide for Power LED status indications.
Troubleshooting issues related to network interfaces.
Troubleshooting guide for Net LED status indications.
Explains display indicators for errors and warnings.
Explanation of the part numbering system for AMS devices.
Lists different AMS 358i models with EtherNet/IP interface.
Lists different types of reflective tapes and their specifications.
Lists available accessories for the AMS 358i.
Details on the optional mounting bracket.
Information on laser beam deflector units.
Details about M12 connector accessories.
Information on power supply connection cables.
Information on EtherNet/IP connection cables.
General advice on maintenance, including cleaning.
Procedures and guidelines for device repair and servicing.
Instructions for safely disassembling and disposing of the device.
To Next Page
