FUSED SPUR ELECTRONIC TIMER 24/7 DAY CONTROL
Fitting & User Instructions
LEV24/7PFS
LEV0772i/Issue 2/09.21/Page 2 of 4
INSTALLATION
• Before carrying out the installation, ensure that the mains supply
has been isolated and the appliance power switch is turn off and
the supplied fuse has been removed.
• Please make sure the back box to house this appliance is at least
25mm deep, we recommend the use of a deeper back box for easier
installation. Ensure at least a 300mm air circulation is allowed around
the appliance.
• Connect the incoming mains supply and outgoing load cables to the
relevant terminals according to the markings on the appliance.
Ensure all terminal screws have been tightened correctly.
• This appliance is also provided with 2 pre-installed removable cable
inlets for surface cable entry. These cable inlets have been designed
to accommodate both flat and round cable.
• Finally secure the appliance to the back box with the fixing screws
provided, forming the cables during installation to avoid any
cable damage.
Internal Schematic
Battery
• This appliance has a built-in non-replaceable rechargeable battery,
the battery will store the pre-set programmes when the appliance is
powered off for up to 20 days.
• Before programming for the first time, it is recommended to connect the
appliance to the mains for at least 15 minutes prior.
• If the screen goes blank or very faint after a long shut down, please
reconnect the appliance to mains power and let the battery recharge.
Reset the timer and re-enter the clock and programmes according.
230-240V~50Hz
Product Ref Switching
Rating
Watts Description Weight
(kg)
Width
(mm)
Height
(mm)
Depth
(mm)
LEV24/7PFS 13(2)A 2990W (Max) Fused Spur Electronic Timer 24/7 Day Control 0.180 86 86 45
FEATURES
• 24-hour 7-day digital control
• 24 ON & 24 OFF programmes
• LED Indicators
• Auto screen lock function
• 15-mins, 30-mins, 1-hour or 2-hour boost facility
• Auto ON/OFF, ON & OFF switching options
• Fuse replaceable from the front
• Back-up battery
• Fits a single gang wall box
• Protective cover for neat installation
TECHNICAL SPECIFICATIONS
• Voltage Range: 230- 240Vac, 50Hz
• Switching Rating: 13A Resistive Load, 2A Inductive Load
• Operating Wattage: 2990W max
• Standby Power: <0.5W
• Fuse Supplied: BS1362 13A Fuse (Supplied)
• Contact Type: Normally Open
• Min. Depth of Wall Box: 25mm
• Screen Type: LCD screen
• Shortest Switching Time: 1 Min
• Boost Time: 15 Mins, 30 Mins, 1 Hour, 2 Hours
• Programme: 24 ON and 24 OFF programmes
• Operating Temperature: -10ºC to 40ºC
• Power Status LED indicator: Red
• Output LED indicator: Green
• Cable Inlet: 2 x cable clamps
• Suitable for Cable: Both Round and Flat T&E cables
• Dimensions (H×W×D): 86mm x 86mm x 45mm
• Conform to: EN 60730-1/2-7
L “IN” Supply
live terminal
E Loop
Terminal
for Earth
continuity
L “OUT”
Switched Live
Terminal
(load Live
connection)
N “IN” Supply
Neutral Terminal
N “OUT”
Switched Neutral
Terminal
(load Neutral
connection)
L-IN L-OUT
TIME-SWITCHBS1362/FUSE
APPLIANCESUPPLY
N-IN N-OUT
DOUBLE POLE SWITCH
LEV0772i_LEV24-7PFS_Instructions.indd 2LEV0772i_LEV24-7PFS_Instructions.indd 2 16/09/2021 13:3016/09/2021 13:30
To Next Page
Loading...