Symptom: LEVO is leaking.
LEVO dispenses through a silicone nozzle attached to the
base of the reservoir. If the nozzle is not attached securely
or properly inserted into the unit, liquid can leak out of the
nozzle onto the heat plate beneath the reservoir. This
requires additional cleanup. To avoid this, make sure you
are holding down the RELEASE button when you are
lowering the reservoir into the LEVO chamber and line the
nozzle up with the dispensing hole. Hold down the
RELEASE button when removing the empty reservoir
after your infusion is complete. If the nozzle rips and is
stuck inside the machine, press and hold the
RELEASE button to release the pinch valve while remov-
ing it from the dispense hole with tweezers and contact us
for a replacement piece.
For complete details on LEVO's warranty, visit:
LEVOoil.com/warranty
Check out the LEVO blog for more tips
of using your machine and avoiding
common issues.
Tag your creations with
#LEVOmade on social!
14
To Next Page
Loading...
Need help?
General
