Lewis 150-2 - Page 37

36
Part No.
1388 L
1442 L
22508
22559 D
22652 A-8
61292 H
404-114
404-126
405-393-1
405-394-6
405-394-7
405-395-2
405-395-4
405-529-1
426-47
427-122
427-123
427-124
433-93
433-144
433-147
433-151
439-7
447-141
448-131
448-135
449-27
468-23
468-23-1
479-8
Plate
9
11
6,8
3
11
8
8
10
10
10
10
10
10
3
7
7
7
2
2,4,7
6, 7
4,6
3
2, 3
4,5
2
2
3
3
3
PARTS LIST
Description
Collar, for eccentric stud 17-157 in base
Tension Staff Stop Pin, for 1183 L
Screw, for knee press pad 4129-18 and for latch
51-14 in 404-126
Screw, for ball connecting rod on 447-141
Screw, in link 46-202, to clamp eccentric stud
17-114 in head
Tension Release Washer
Large Work Table, Models 150-32, 150-33,
150-34, complete with bracket 50-227
Swing Work Table, when using 32-264 end cover.
Models 150-2, 150-3, 150-4
Presser Foot, 7 I 32 inch opening, complete, for
light work. Models 150-2, 150-3, 150-4
Presser Foot, 114 inch opening, complete, for
medium work. Standard foot models 150-2,
150-3, 150-4
Presser Foot, 114 inch opening, complete, for
drapery work. Models 150-32, 150-33, 150-34
Presser Foot, 9/32 inch opening, complete, for
heavy work. Models 150-2, 150-3, 150-4
Presser Foot, 9 I 32 inch opening, complete, for
heavy drapery work. Models 150-32, 150-33,
150-34
Presser Foot, 9/32 inch opening, complete, for
extra heavy work. Models 150-2, 150-3, 150-4
Stitch Adjusting Plunger, complete, on top of
head
Gear Assembly, in arm, 2-to-1 ratio, complete,
with jack shaft 14-272. Models 150-2, 150-32
Gear Assembly, in arm, 3-to-1 ratio, complete,
with jack shaft 14-27 2. Models 150-3, 150-3 3
Gear Assembly, in arm, 4-to-1 ratio, complete,
with jack shaft 14-272. Models 150-4, 150-34
Needle Driving Eccentric, in head
Eccentric, for oscillating ridge forming disc on
main shaft in arm
Eccentric, for oscillating ridge forming disc on
rna in shaft in arm
Eccentric, on shaft 14-458 for lever 45-352 in
base of arm
Collar, complete, with screws SB15, on needle
shaft14-14 in head
Ball Connecting Rod, complete with ball 79-28,
for driving needle in head
Crank, with screw 1158 L on ridge forming disc
shaft 14-394 in cylinder base
Crank, with bushing 16-321 for driving looper
on main shaft in head
Looper Yoke, with screw 18-71 in head
Tension Staff, with pin guide on top of head
Tension Staff, complete, composed of 20-60,
1132 L, 1160 L, (2) 1183 L and 468-23 on top
of head
Ball, with screw 18-74 in looper ball join t
4124-27 in head
From the library of: Superior Sewing Machine & Supply LLC