LEXIBOOK RCD100DC - Operation - Playing a CD; CD Setup and Playback; CD Playback Controls

OPERATION (CONTINUED)
11
Slide the OFF/ON switch 1 to ON to
turn the unit on. Slide the FUNCTION
switch
2 to the CD position to select
CD.
2
1
2
Open the CD compartment door by pressing
the CD Door Open/Close Area. Place a CD
on the center spindle, with the printed label
side facing up. Close the CD compartment
door. The total tracks on the disc will appear
in the display.
3
Press the PLAY/PAUSE (®p) button
1 to start playback on the first track;
the PLAY indicator and the current track
will appear in the display. Adjust the
VOLUME control
2 as desired.
1
2
4
Press the PLAY/PAUSE (®p) button
again to pause playback; the PLAY indi-
cator will blink. Press the PLAY/PAUSE
(
®p) button once again to continue
playback; the PLAY indicator will stop
blinking.
5
To skip forward or backward through the
tracks on the disc, press the Skip/Search
o
1
or n 2 button.
To
search forward or backward through the
music on a disc, press and hold the
Skip/Search
o 1 or n 2 button, a chattering
noise will be heard.
2
1
6
TO PLAY A CD
CONTINUED ON THE NEXT PAGE
For best sound quality, extend both
speakers outward as shown above.
1