Audio Controls Lexicon
4-4
TREBLE -6.0dB to +6.0dB
Controls the amount of boost or cut applied to the Main Zone
audio output connectors labeled Front L/R and Center. The graph
shown at the right indicates the frequency response of all TREBLE
parameter settings.
To control the treble from the remote control:
Press the Shift button:
•Press the PVR button to increase the TREBLE parameter setting
in 0.5dB increments.
•Press the TUNER button to decrease the TREBLE parameter
setting in 0.5dB increments.
•Press the OSD button to set the BASS, TREBLE, and TILT EQ
parameters to +0.0dB.
AUDIO CONTROLS
TREBLE
The TREBLE parameter controls the amount of boost or cut applied to the Main
Zone audio output connectors labeled Front L/R and Center.
TREBLE
To Next Page
Loading...
