Lexicon MC-12HD - Appendix A: Command Codes

Lexicon MC-12HD Serial Communications Protocol
Appendix A: Command Codes
Notifications:
DC_NO_CMD 0x00
DC_WAKEUP 0x01
DC_SLEEP 0x02
DC_FPD 0x03
MC_PARAM_NOTIFICATION_MSG 0x04
Host Commands:
DC_CMD_RESET 0x10
HOST_WAKEUP 0x11
HOST_SLEEP 0x12
DC_CMD_RESTORE_DEFAULTS 0x13
DC_CMD_GET_CUST_NAME 0x2B
DC_CMD_SET_CUST_NAME 0x2C
DC_CMD_GET_COM_CONFIG 0x2F
DC_CMD_SET_COM_CONFIG 0x30
DC_CMD_SET_MUTE 0x31
DC_CMD_SET_DISPLAY_STR 0x33
MC_CMD_GET_PARAM_BY_ID 0x35
MC_CMD_SET_PARAM_VALUE_BY_ID 0x36
MC_CMD_SET_PARAM_VALUE_BY_ID_NO_RUN 0x37
MC_CMD_GET_CONFIG 0x38
MC_CMD_IR 0x39
MC_CMD_GET_PARAM_VALUE_BY_ID 0x3A
MC_CMD_SET_PARAM_NOTIFICATION_BY_ID 0x3B
MC_CMD_PARAM_GET_VALUE_STRING_BY_ID 0x3C
MC_CMD_CLEAR_ALL_PARAM_NOTIFICATIONS 0x3D
MC_CMD_GET_SYS_STATUS 0x3E
MC_GET_REC_ZONE2_STATUS 0x3F
MC_CMD_SET_SYS_VOLUME 0x40
MC_CMD_SET_SYS_BALANCE 0x41
MC_CMD_SET_FRONT_BACK_BALANCE 0x42
MC_CMD_SET_EFFECT 0x43
MC_CMD_SET_REC_INPUT 0x44
MC_CMD_SET_ZONE2_VOLUME 0x45
MC_CMD_SET_ZONE2_BALANCE 0x46
MC_CMD_GET_INPUT_NAME 0x47
MC_CMD_SET_INPUT_NAME 0x48
35