Lexicon
2-14
PCM 90 User Guide
3.7 SysEx
This control is provided for communication with one or more additional PCM 90s
or computer editor software. On (the default setting) allows SysEx messages
to be received by the PCM 90. Press Load/✱ to select device ID (0-126 ).
3.8 Dump
Press Store to configure the PCM 90 to execute MIDI dumps of single effects,
banks, maps, chains, or setups.
3.9 Dump Speed
Turn ADJUST to select dump speeds of Slow, Medium or Fast to achieve
compatibility with the connected MIDI device.
To Next Page
Loading...
