40
Deleting a Patch
To delete a patch from a register:
1. Select the parameter.
2. Press and hold down the PARAMETER/
LEARN button until scale values appear
on the display.
3. Release the PARAMETER/LEARN but-
ton
without
sending any MIDI informa-
tion. "CL" will appear briefly on the dis-
play to indicate all patches have been
cleared.
4. Perform a STORE operation.
In APM you can clear any patches to a
displayed parameter by briefly pressing
STORE/CLEAR.
Accidental Patch Deletions
Note that deleting a patch uses the MIDI
LEARN function. This means that, if you load
an effect with stored patches, then press
PARAMETER/LEARN to set the Reflex MIDI
Channel, you will also clear the stored
patches.
To Next Page
Loading...
