Diagnostic aids 3-29
4500–E320/E322
PPDS active/inactive
If PPDS is active, the following user default printer settings are
changed:
• PCL and PostScript SmartSwitch settings for each port are
turned off.
• Printer language is changed to PPDS emulation.
If PPDS is inactive, the following user default printer settings are
changed:
• PCL and PostScript SmartSwitch settings for each port are
turned on.
• Printer language is changed to PCL 5 emulation.
Note: PPDS can be activated using the PJL LPPDS command.
Off/on/auto Setting value
❍ PPDS is inactive.
● PPDS is active.
To Next Page
Loading...
