Lexmark 7017-636 - Flatbed Scanner Removal

3
2
2
1
1 Rollers
2 Guides
3 Flags
Flatbed scanner removal
1 Remove the ADF assembly. See “ADF assembly removal” on page 285.
2 Remove the right cover. See “Right cover removal” on page 223.
3 From the controller board, remove the screw (A), and then disconnect the following cables:
• Control panel cable
• Headphone jack cable
Note: This is applicable only to the MX321 models.
• Speaker cable
• ADF cable
• ADF scanner cable
7017-2xx, -4xx, -6xx
Parts removal
291