Lexmark 7462 series - Page 118

Error code Description Action
241.06 Sensor (input) late jam (tray 1 or MPF)
The media is late reaching the sensor (input)
within the specified time.
Go to
“Sensor (input) late jam service check”
on page 73.
241.07 Pick motor load error (media tray 1)
The pick motor has failed or caused high
mechanical load due to paper jam or bind.
Go to
“Tray pick motor load error service
check” on page 129
241.08
241.10 Sensor (input) late jam (tray 1)
The media is late reaching the sensor (input)
within the specified time.
Go to
“Sensor (input) late jam service check”
on page 73.
241.11
241.12 Sensor (input) late jam (tray 1 or envelope feeder)
The media is late reaching the sensor (input)
within the specified time.
241.14
241.15
241.16 Sensor (input) late jam (tray 1)
The media is late reaching the sensor (input)
within the specified time.
241.18
241.19 Pick motor control failure (tray 1)
The pick motor does not reach the proper
operating speed at the specified time.
Go to
“Tray pick motor load error service
check” on page 129.
241.20 Tray 1 pick motor lost encoder failure (tray 1)
The pick motor is not reporting pulses back to the
engine.
Go to
“Tray pick motor lost encoder failure
service check” on page 131.
7462
Diagnostic information
118