Alignment assembly removal
Warning—Potential Damage: When replacing the alignment assembly, ensure that the media skew is
properly adjusted using the adjuster screw (C), or jamming will occur. Go to
“Alignment assembly
adjustment” on page 305.
1 Remove the left side cover. Go to “Left side cover removal (models X651, X652, X654, and X656)” on
page 317 or “Left side cover removal (model X658)” on page 318.
2 Remove the six screws (A) securing the metal cover to the machine.
A
3 Remove the metal cover.
7462
Repair information
309
To Next Page
Loading...
