Lexmark C543dn - Page 15

No changes needed on this page.
31. With the MMBB program running on your MMBB Server, hold the shift key
and press F10. Your password is 15A4D or whatever you have set it to be. Click
on System Options and put a check mark in the Redirect Printer box. Click on the
arrow to open a list of installed printers. Select the Lexmark C543DN. Put a
check mark in the box for “Duplex Printing”. Save settings. Then exit this screen
and close and restart the MMBB program.
32. The System Options screen (in step 31) is also where you adjust the print to
fit within the perforations on the insert paper. Adjustments are done in inches, so
.1 is a tenth of an inch. Positive numbers move the print to the right on the
horizontal and down on the vertical. Negative numbers move the print to the left
and up on the page.
Your new Lexmark C543DN Laser Printer should now be set-up correctly to
work with myMEDIA BurnBar™.
If any problems are encountered during this procedure please contact
Integra Interactive
Tech Support
800.882.4416 Extension 50
Or
techsupport@integrainteractive.net