4
c Slide the unit out of the
machine and place it on a
clean flat surface.
6 Perform one of the following:
— If you are not installing a new
transfer roller, skip to step 10.
— If you are installing a new
transfer roller, go on to step 7.
7 Remove the old transfer roller
from the printer.
a Using your left hand, reach
through the side of the printer
and hold up the transfer roller
wheel.
b Using your right hand, reach
through the front of the printer
and lift the end of the transfer
roller away from the back of
the printer.
c Pull the roller completely out of
the printer and discard it.
To Next Page
Loading...
