Deleting
Wait for the message to clear.
Disabling DLEs
Wait for the message to clear.
Disabling Menus
Wait for the message to clear.
Note: While the menus are disabled, printer settings cannot be changed from the control panel.
Disk Corrupted. Reformat?
The printer attempted to recover a disk, but was not able to do so. Reformat appears. Press to reformat the
disk.
Note: Reformatting the disk deletes all the files currently stored on the disk.
Disk recovery x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is attempting to recover the printer hard disk.
Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.
Empty hole punch box
Empty the hole punch box, and then reinsert it into the finisher. Wait for the message to clear.
Note: To learn how to empty the hole punch box, press
repeatedly until Show Me appears, and then press .
Enabling Menus
Wait for the message to clear.
Encrypting disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is encrypting the printer hard disk.
The percentage completed appears on the display.
Understanding printer messages 114
To Next Page
Loading...
