58 Too many flash options installed
1 Turn the printer power off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer power back on.
58 Too many trays attached
1 Turn the printer power off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer power back on.
61 Remove defective hard disk
• Press until Continue appears, and then press to clear the message and continue printing.
• Install a different hard disk before performing any operations that require a hard disk.
62 Disk full
• Press until Continue appears, and then press to clear the message and continue processing.
• Delete fonts, macros, and other data stored on the hard disk.
• Install a larger hard disk.
63 Unformatted disk
• Press until Continue appears, and then press to clear the message and continue printing.
• Format the disk.
If the error message remains, the hard disk may be defective and require replacing.
80 Scheduled maintenance <x>
Contact Customer Support, and report the message. The printer needs to have scheduled maintenance done.
Understanding printer messages 125
To Next Page
Loading...
