Lexmark Color Laser - Before Configuring the Device; Verifying interfaces and firmware; Attaching a lock

Installing the printers to a network (Macintosh)
Installing the printer on a wired network (Macintosh)
1 Install the driver file on the computer:
a Insert the Software and Documentation CD, and then double-click the installer package for the printer.
b Follow the instructions on the computer screen.
c Select a destination, and then click Continue.
d From the Standard Install screen, click Install.
e Type the user password, and then click OK.
All the necessary software is installed on the computer.
f Click Close when installation is complete.
2 Add the printer:
• For IP printing:
In Mac OS X version 10.5 or later
a
From the Apple menu, navigate to:
System Preferences > Print & Fax
b Click +, and then click the IP tab.
c Type the IP address of your printer in the Address field, and then click Add.
In Mac OS X version 10.4 or earlier
a
From the Finder, navigate to:
Applications > Utilities
b Double-click Printer Setup Utility or Print Center.
c From the Printer List, click Add, and then click IP Printer.
d Type the IP address of your printer in the Address field, and then click Add.
• For AppleTalk printing:
Note: Make sure AppleTalk is activated on your printer.
In Mac OS X version 10.5
a
From the Apple menu, navigate to:
System Preferences > Print & Fax
b Click +, and then navigate to:
AppleTalk > select the printer from the list > Add
In Mac OS X version 10.4 or earlier
a
From the Finder, navigate to:
Applications > Utilities
b Double-click Printer Setup Utility or Print Center.
c From the Printer List, click Add.
d Click Default Browser tab > More Printers.
e From the first pop-up menu, select AppleTalk.
Connection Guide
Page 6 of 7