Lexmark CX725 - Page 68

Actions Yes No
Step 7
Open, and then properly close the following ADF top cover.
Does the problem remain?
Go to step 8. The problem is
solved.
Step 8
From the home screen, navigate to:
Settings > Device > Maintenance > Configuration Menu >
Scanner Configuration > ADF Deskew > ADF Mechanical
Deskew > On
Does the problem remain?
Go to step 9. The problem is
solved.
Step 9
From the home screen, navigate to:
Settings > Device > Maintenance > Configuration Menu >
Scanner Configuration > ADF Deskew > ADF Electronic Deskew
> On
Does the problem remain?
Go to step 10. The problem is
solved.
Step 10
Check the ADF pick roller assembly for wear or damage.
Is the assembly free of wear or damage?
Go to step 12. Go to step 11.
Step 11
Replace the ADF pick roller assembly.
Does the problem remain?
Go to step 12. The problem is
solved.
Step 12
Check the ADF separator roller for wear or damage.
Is the roller free of wear or damage?
Contact the next
level of support.
Go to step 13.
Step 13
Replace the separator roller.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
7528
Diagnostic information
68