Lexmark Impact S300 Series - Using the Printer Control Panel Buttons and Menus; Using the Printer Control Panel

Using the printer control panel buttons and menus
Using the printer control panel
123456
8910111213
7
ON START
Color
Black
Cancel
2-Sided
Eco-Mode
Use the To
1 Power button
• Turn the printer on and off.
• Switch to Power Saver mode.
Note: When the printer is on, press
to switch to Power
Saver mode. Press and hold
for three seconds to turn
off the printer.
2 Copy button Access the copy menu and make copies.
3 Scan button Access the scan menu and scan documents.
4 Photo button Access the photo menu and print photos.
5 Color/Black Switch to color mode or black-and-white mode.
6 Start button Start a print, scan, or copy job, depending on which mode is
selected.
7 2-Sided/Eco-Mode Activate 2-Sided to:
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
• Change to Power Saver mode after the printer is left idle
for ten minutes.
• Set screen brightness to low.
Note: 2-Sided/Eco-Mode is available only on select models.
Using the printer control panel buttons and menus
15