Lexmark J110 - Page 101

PJL
3-31
LENVELOPEWEIGHT
(DEFAULT only)
Envelope
Weight
LIGHT, NORMAL, HEAVY NORMAL
LESCCHAR
(READ only)
(Port specific)
ESC
Character
Substitution
0to255 27
LFAXRESOLUTION
(SET only)
Fax Resolution STANDARD, FINE, SUPERFINE, ULTRAFINE
Note: Status Readback commands return a ? when
no SET command has modified the
LFAXRESOLUTION variable. For more information,
see “Status Readback Commands” on page 3-53.
STANDARD
LFAXREDIAL
(SET only)
Fax Redial 0 to 14
Note: Status Readback commands return a ? when
no SET command has modified the LFAXREDIAL
variable. For more information, see “Status Readback
Commands” on page 3-53.
5
LFAXREDIALFREQUENCY
(SET only)
Fax Redial
Frequency
1to200
Note: Status Readback commands return a ? when
no SET command has modified the
LFAXREDIALFREQUENCY variable. For more
information, see “Status Readback Commands” on
page 3-53.
3
LFAXTRANSMISSIONLOG
(SET only)
Fax
Transmission
Log
PRINT, DONOTPRINT, PRINTERROR
Note: Status Readback commands return a ? when
no SET command has modified the
LFAXTRANSMISSIONLOG variable. For more
information, see “Status Readback Commands” on
page 3-53.
PRINTERROR
LFEEDERPAPERTYPE Envelope
Feeder Paper
Type
ENVELOPE, CUSTOMTYPE1, CUSTOMTYPE2,
CUSTOMTYPE3, CUSTOMTYPE4, CUSTOMTYPE5,
CUSTOMTYPE6, “name”
name is a variable that allows for custom naming of
print material types. The text string is truncated to 24
characters.
ENVELOPE
LHOLEPUNCHALARM Hole Punch
Alarm
OFF, SINGLE, CONTINUOUS OFF
LHONORINIT
(DEFAULT only)
(Port specific)
Honor INIT
Signal
HONORSIGNAL, DONOTHONORSIGNAL DONOTHONOR
SIGNAL
LIMAGEBRIGHTNESS Image
Brightness
-100 to 100 0
LIMAGECONTRAST Image Contrast -100 to 100 0
Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable Function Selections Factory Default