Lexmark J110 - Clearance Requirements

Specifications
7-5
Clearance Requirements
Table 7-7: Clearance Requirement Specifications
Printer Side
Printer Model
C720
*
J110 T520 T522
Left side 102 mm (4 in.) 25 mm (1 in.) 304.8 mm (12 in.) 304.8 mm (12 in.)
Right side 508 mm (20 in.) 75 mm (3 in.) 304.8 mm (12 in.) 304.8 mm (12 in.)
Front 711 mm (28 in.) 356 mm (14 in.) 508 mm (20 in.) 508 mm (20 in.)
Rear 711 mm (28 in.) Can be next to a
wall if necessary;
no special
clearance required
304.8 mm (12 in.) 304.8 mm (12 in.)
Above 198 mm (7.8 in.) 305 mm (12 in.) 305 mm (12 in.) 305 mm (12 in.)
*
Network printer with the optional duplex unit attached.
Table 7-8: Clearance Requirement Specifications
Printer Side
Printer Model
T620 T622 W820
Left side 305 mm (12 in.) 305 mm (12 in.) 95.25 mm (3.75 in.)
Right side 305 mm 12 in.) 305 mm 12 in.) 95.25 mm (3.75 in.)
Front 508 mm (20 in.) 508 mm (20 in.) 254 mm (10 in.)
Rear 305 mm (12 in.) 305 mm (12 in.) 254 mm (10 in.)
Above 305 mm (12 in.)* 305 mm (12 in.)* 228.6 (9 in.)
* If the Lexmark T620 and T622 models have an optional output device attached
or are fully configured printers, then the clearance required is 1372 mm (54 in.).