Specifications
7-7
Altitude Specifications
Atmospheric Pressure
74.6 to 101.3 kPa (560 to 760 mmHg)
Power On to Ready State Time Period
After you turn the printer on, it performs certain internal diagnostics and prepares for
printing. The following table lists the approximate time it takes for your printer to
perform the internal diagnostics and enter the
Ready state. Once the printer enters the
Ready state, it is prepared to print.
Table 7-11: Printer Altitude Specifications
Printer Model Altitude (Above Sea Level)
C720 0 – 2500 m (8,200 ft)
J110 0 – 3000 m (9,750 ft)
T520 0 – 3048 m (10,000 ft)
T522 0 – 3048 m (10,000 ft)
T620 0 – 3048 m (10,000 ft)
T622 0 – 3048 m (10,000 ft)
W820 0 – 2500 m (8,200 ft)
Table7-12: PowerOntoReadyStateTimePeriod
Printer Model
Time to Ready (Time in
Seconds)
C720 240
J110 First power on: 510
Subsequent power on:
• 25 (nominal)
• 390 (maximum)
T520,T522 45
T620 42
T622 43
W820 77
To Next Page
Loading...
