Lexmark J110 - Setting up the Communications Port Using OS;2

Interfaces
8-5
Setting Up the Communications Port Using OS/2
1 From the desktop of your PC, right click on the printer icon for the printer
you want to set up.
2 Select Printer Properties.
3 Select Output Port.
4 From the icons displayed, select one from the following: COM1, COM2,
COM3, COM4
5 Once the communications port is highlighted, right click on it.
6 Select Properties.
7 On the screen displayed, fill out the fields for the following printer settings
to make them match your printer settings:
• Description
• Timeout
• Baud Rate
• Word Length
• Parity
• Stop bits
• Handshake
8 Select OK.
The communications port is now set up.
9 Close the window to return to the desktop.