PCL Support
A-4
ESC
)3@ Select Default Secondary Font 2-34
ESC
)s#B Secondary Font Stroke Weight 2-34
ESC
)s#H Secondary Font Pitch 2-33
ESC
)s#P Secondary Font Spacing 2-33
ESC
)s#S Secondary Font Style 2-33
ESC
)s#T Secondary Font Typeface Selection 2-34
ESC
)s#V Secondary Font Height (Point Size) 2-33
ESC
)s#W[data] Load Font Header 2-36
ESC
*b#M Set Raster Compression Mode 2-41
ESC
*b#V[data] Transfer Raster Data (by Plane) 2-40
ESC
*b#W[data] Transfer Raster Data (by Row / Block) 2-41
ESC
*b#Y Y Offset 2-40
ESC
*c#A Horizontal Rectangle Size (in PCL Units) 2-38
ESC
*c#B Vertical Rectangle Size (in PCL Units) 2-38
ESC
*c#D Set Font ID 2-36
ESC
*c#E Set Character Code 2-36
ESC
*c#F Font Control 2-36
ESC
*c#G Area Fill ID 2-37,
2-39
ESC
*c#H Horizontal Rectangle Size (in Decipoints) 2-38
ESC
*c#K GL/2 Horizontal Plot Size (in Inches) 2-46
ESC
*c#L GL/2 Vertical Plot Size (in Inches) 2-46
ESC
*c#P Fill Rectangular Area 2-39
ESC
*c#Q Pattern Control 2-38
ESC
*c#R Symbol Set ID Code 2-35
ESC
*c#S Symbol Set Control 2-35
Table A-1: PCL Emulation Commands (Continued)
Supported
Not Supported
Command
Page numbers reference command descriptions. Printer Model
Function Page
C720
J110
T520, T522
T620, T622
W820
To Next Page
Loading...
