Lexmark M1140 - Swivel Cabinet 3052765

Printer configuration MFP option Duplex unit Optional 500-sheet drawers
1 2 3
C X
• If an optional duplex unit is installed, then:
– The duplex unit must be directly under the printer for any of the listed configurations.
– All paper-handling options must be installed under the duplex unit.
• A printer without MFP option can also support a maximum combination of one optional 2,000-sheet drawer and
one optional 500-sheet drawer without a printer stand. An optional 500-sheet drawer, as the first option under the
duplex unit, is required when using a 2,000-sheet drawer and duplex unit configuration.
Swivel cabinet 3052765
For more information, see the supported configurations for each printer:
• “Lexmark T65x with caster base 39V3588” on page 26
• “Lexmark X651, X652, X654, and X656 MFPs with desktop and swivel cabinet” on page 38
• “Lexmark C73x” on page 16
• “Lexmark X73x with desktop and swivel cabinet” on page 42
• “Lexmark X651, X652, X654, and X656 MFPs with desktop and swivel cabinet” on page 38
Supported maximum configurations 47