Need help?Do you have a question about the Lexmark Optra E310 and is the answer not in the manual?
General| Printer Type | Laser |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Max Resolution (BW) | 600 x 600 dpi |
| Connectivity | USB, Parallel |
| Memory | 8 MB |
| Paper Capacity | 250 sheets |
| Media Size | Letter, Legal, A4 |
Introduces the technical reference and its scope regarding printer commands and languages.
Details methods for selecting PCL emulation.
Explains how SmartSwitch automatically switches between printer languages.
Details font and symbol set support in PCL emulation for specific printers.
Lists PCL emulation fonts and their support for various symbol sets.
Lists PCL emulation commands grouped by function.
Explains how UEL command terminates printer language and switches to PJL.
Instructs the printer to enter a specified language like PCL or PostScript.
Covers PJL JOB and EOJ commands for separating print jobs.
Explains commands to modify or query printer environment variables.
Modifies default environment settings and stores them in NVRAM.
Modifies the current setting of an environment variable immediately.
Enables requesting configuration and status information from the printer.
Queries the default setting (NVRAM) of a specified environment variable.
Queries status information from the printer, categorized by parameter values.
Queries the current setting of a specified environment variable.
Enables and disables unsolicited status messages from the printer.
Details messages displayed when paper handling intervention is needed.
Lists messages for paper jams requiring operator intervention.
Covers commands for device status and attendance messages.
Lists commands for managing resources on flash and disk devices.
Information regarding password protection for files and devices.
Uses LDECLARE to specify password for accessing protected files/devices.
Uses LQUERYSEED and LBYPASSPASSWORD commands to recover lost passwords.
Details methods for selecting PostScript emulation.
Lists resident PostScript emulation scalable fonts for these printers.
Lists resident fonts for these printers, including Type 1 fonts.
Explains PostScript emulation supplemental operators, syntax, and values.
Identifies each print job selection and queries/changes the current JobName setting.
Explains how printers return PostScript emulation error and status messages.
Describes how printers send one-line status messages back to the host computer.
Allows printer to switch between PCL and PostScript emulation dynamically based on input.
Saves PCL/PostScript resources to flash memory or disk.
Steps to download resources using operator panel, MarkVision, or PJL command.
Details the two levels of password protection: Read/Write and Write.
Covers how to access files using PostScript emulation operators.
Explains default search order (disk, flash) and how to change it using devmount/devdismount.
Details storing incoming print jobs on disk for buffering functions.
Explains immediate effect of disabling job buffering and reallocation of memory.
Discusses potential loss of spooled jobs and printing jobs held in buffer after power restoration.
To Next Page
