PostScript
4-59
setquiet
integer setquiet —
changes the user default setting of the PowerSave page device parameter.
The following integers are valid:
0 Power Saver Off
1 to 120 or 1 to 240 (Model specific)
Number of minutes elapsed after last page prints before
Power Saver is invoked.
Any changes made by this operator are not active until the end of the print job.
Note: Some printer models released in the year 2000 or later designated as Energy
Star printers cannot have Power Saver disabled.
This operator is equivalent to executing the following PostScript emulation
sequence:
%Go into exitserver or startjob context
<< /PowerSave integer >> setpagedevice
Errors: rangecheck, stackunderflow, typecheck
To Next Page
Loading...
Need help?
General