Lexmark T650 Series - Page 17

LEXMARK T650 SERIES • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
33. Take the toner hopper and install it left side first.
Make sure that the left side post and the white bearing are in their proper slot.
34. On the right side of the cartridge, pull the cartridge shell
out so that the right side post falls into its slot.
35. With the spring hook, replace both springs on to the toner
supply chamber.