Lexmark T650 Series - Page 19

LEXMARK T650 SERIES • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
CARTRIDGE TROUBLESHOOTING
Cartridge Repetitive Defect Chart:
OPC Drum 94mm
Developer Roller 62mm
PCR (in machine) 38mm
Machine Error Codes
Most of the error messages appear to be in text, and do not need an explanation.
No numeric messages are listed in the user guide except for the following:
42.xy This is a cartridge region mismatch.
The 'x' = the printer region and the 'y' = the cartridge region.
Both must match each other.
Region Codes are as follows (see text at beginning of article):
0 Worldwide
1 America
2 Europe region
3 Asia region
4 Latin America
9 Invalid region
TAKING TEST PRINTS
Printer Menu:
1. Press the MENU key.
2. Press the DOWN ARROW until “CONFIG MENU” shows on the display.
3. Press the SELECT button.
4. Press the DOWN ARROW until the check mark is next to “PRT QUALITY PAGES.”
5. Press the SELECT button
Included on these pages are:
1. Device information
2. Printer revision
3. Cartridge information
4. Printer margin settings
5. Minimum stroke width