Supported Bar Codes
127
USPS sack label
8-digit 2 of 5
YYYYY
2
USPS Sack Label 8-digit 2 of 5 is a modified interleaved
2-of-5 code.
The bar code encodes the following information: the 5-digit
ZIP Code destination of the sack and the 3-digit content
identifier number (CIN) applicable to the content of the sack.
USPS tray label
10-digit 2 of 5
YYYYY
2
USPS Tray Label 10-digit 2 of 5 is a modified interleaved
2-of-5 code.
The bar code encodes the following information: the 5-digit
ZIP Code destination of the tray; the 3-digit content identifier
number (CIN) applicable to the content of the tray; and the
applicable 2-digit USPS processing code.
Zebra YYYYY
2
The Zebra code is used by the USPS on tray labels to serve
as a visual indication that the tray contains bar-coded
automation-rate mail. It is not read by bar code readers.
The Zebra code consists of a series of diagonal or vertical
marks. The diagonal or vertical marks must each be from
0.25 to 0.375 inch high, and from 0.125 to 0.25 inch wide,
separated by blank spaces equal in size to the diagonal or
vertical marks.
Bar Code Name
Lexmark
TM
Forms and Bar
Code Card v3.0
Lexmark
TM
Forms and Bar
Code Card v3.1
LDSS Forms
Composer
v3.3.9
LDSS
Document
Producer
Lexmark
Optra Forms
TM
Sample Image Comments
1 PDF417 and MaxiCode can be printed using Optra Forms
TM
only when the Bar Code Option is also installed in the printer, and when the accompanying bar code
dictionaries have been installed in Optra Forms
TM
.
2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms
TM
when the Bar Code Option is
installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms
TM
.
3 These Bar Codes not available in PCL5 or PostScript.
To Next Page
Loading...
