EasyManua.ls Logo

Lexmark T656 - Installation Setup for Mainframe Users

Lexmark T656
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
One-dimensional bar codes
23
a larger RSS Stacked Omnidirectional which can be scanned omnidirectionally.
Note: The RSS Stacked Omnidirectional bar code is not supported by the Forms and Bar
Code Card.
Field Name Type Range
Default
(if not specified)
Description
Esc (s#T name n/a n/a Required.
24810T specifies
RSS-14 (standard)
24811T specifies
RSS-14 Truncated
24812T specifies
RSS-14 Stacked
24814T specifies
RSS-14 Limited
24815T specifies
RSS-14 Expanded
Esc(s#V int Min:
3 (dec) or 03 (hex)
Max:
There is no maximum
value, but larger
barcodes may use up
too much memory.
Standard:
33 (dec) or 21 (hex)
Truncated:
13 (dec) or 0D (hex)
Stacked:
13 (dec) or 0D (hex)
(total height)
Limited:
10 (dec) or 0A (hex)
Expanded:
34 (dec) or 22 (hex)
Optional.
Selects the height of the
bars in 1/72”, same
units as Fonts.
Note: Values that are
lesser than the
minimum will use the
corresponding default
value for the specific
RSS bar code type.
Esc(s#1,#2,#3,#4B int Min:
Min. value is 1, but
symbol will be too small
to be readable.
Max:
There is no maximum
value but larger
barcodes may use up
too much memory.
8,16,24,32 (dec)
or
8,10,18,20 (hex)
Optional.
Selects the width of the
bars.

Table of Contents

Other manuals for Lexmark T656

Related product manuals