2-4 Service Manual
4022-XXX
35 Res Save Off Deficient
Memory
The printer lacks the memory needed to enable
Resource Save. This message usually indicates too
much memory is allocated for one or more of the printer
link buffers. Press Go to disable Resource Save and
continue printing. To enable Resource Save after you get
this message:
• Make sure the link buffers are set to Auto, and exit the
menus to activate the link buffer changes.
• When Ready is displayed, enable Resource Save
from the Setup Menu.
Install additional memory if needed.
37 Insufficient Collation Area The printer memory (or hard disk, if installed) does not
have the free space necessary to collate the print job.
Press Go to print the portion of the job already stored
and begin collating the rest of the job. Press Menu to
open the Job Menu and cancel the current job.
37 Insufficient Defrag Memory The printer cannot defragment flash memory, because
the printer memory used to store undeleted flash
resources is full. Delete fonts, macros, and other data in
printer memory. Install additional printer memory if
needed.
37 Insufficient Memory The printer memory is full and cannot continue
processing current print jobs. Press Go to clear the
message and continue the current print job. The printer
frees memory by deleting the oldest held job and
continues deleting held jobs until there is enough printer
memory to process the job. Press Stop to clear the
message without deleting any held jobs. The current job
may not print correctly. Press Menu to open the Job
Menu and cancel the current job. To avoid this error in
the future:
• Delete fonts, macros, and other data in printer
memory.
• Install additional printer memory.
Note: The messages 37 Insufficient Memory and Held
Jobs may be lost alternate on the display.
38 Memory Full The printer is processing data, but the memory used to
store pages is full. Press Go to clear the message and
continue printing the job. The job may not print correctly.
Press Menu to open the Job Menu and cancel the
current job. To avoid the error in the future:
• Simplify the print job by reducing the amount of text of
graphics on a page and deleting unnecessary
downloaded fonts or macros.
• Install additional printer memory.
User Error Message Explanation
To Next Page
Loading...
