EasyManua.ls Logo

Lexmark W812 - Page 94

Lexmark W812
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-38 Service Manual
4022-XXX
8 ENGINE CARD ASSEMBLY REPLACEMENT
Replace the Engine Card. Go to Engine Card Removal on
page 4-10.
Is the Electrical Noise problem still present?
Go to step 9 Problem
solved
9 MAIN DRIVE ASSEMBLY REPLACEMENT
Replace the Main Drive Assembly. Go to Main Drive
Assembly Removal on page 4-18.
Is the Electrical Noise problem still present?
Go to step 10 Problem
solved
10 The following FRUs are associated with this specific problem.
One or more of these FRUs may have failed partially or
completely. If you cannot isolate the problem using this service
check, replace each FRU listed below, one at a time, until the
problem disappears.
Printhead Assembly - Go to Printhead Assembly
Removal on page 4-32.
RIP Controller Card Assembly - Go to RIP Controller Card
Removal on page 4-34.
Step Actions and Questions Yes No

Table of Contents

Other manuals for Lexmark W812

Related product manuals