Diagnostic Aids 3-29
4025-XXX
Clearing the Error Log
To clear the error log, select the Clear Log operation from the ERROR LOG menu. The
printer displays the following message.
Select Ye s to confirm that you really want to clear the log. The error log is cleared and
then the empty log is displayed as shown.
Select No to exit the Clear Log menu. Pressing Return or Stop also exit the Clear Log
menu.
Configuration Mode
Note: Access is gained into the Configuration Menu Group using the Select and Return
POR key sequence. While the Configuration Menu Group is active, all host interfaces are
offline.
Clear Log
=Yes
1-000 2-000
3-000 4-000
Intermediate Menu, Printer
Setting or Printer Operation
Value List
Maint Cnt Value
Only displayed if the
Maintenance Warning and
Intervention function is enabled in
the printer configuration ID.
No selections exist for this operation. Pressing Select
initiates this operation. Go to “Viewing and Resetting
the Maintenance Page Count” on page 3-31.
Reset Maint Cnt
Only displayed if the
Maintenance Warning and
Intervention function is enabled in
the printer configuration ID. For
additional information, go to
“Setting Configuration ID” on
page 3-27.
Reset
For additional information regarding this operation, go to
“Viewing and Resetting the Maintenance Page
Count” on page 3-31.
REGISTRATION
The following printer settings are contained in the REGISTRATION menu. Go to “Setting
Printer Registration” on page 3-32 for a description of this operation.
Pressing Select in any of the following menus not only selects the currently displayed value
as the default, but also prints a ‘Quick Test’ page before returning to the prior level of the
menu.
This menu is not displayed if the printer is in demo mode.
To Next Page
Loading...
