3-32 Service Manual
4025-XXX
Setting Printer Registration
This setting is in the Configuration Menu to allow easier access for customers. This
setting also allows separate Left Margin settings for each paper tray. (The Top Margin
setting is the same for all trays.)
The range of valid settings for the Top margin is 0 to +50. The range of valid settings for
each Left margin is -50 to +50. Each unit represents 1/300 of an inch.
The following margins can be selected for adjustment:
• Top Margin
• Tray 1 Left Margin
• Tray 2 Left Margin
• Tray 3 Left Margin
• Tray 4 Left Margin
• Tray 5 Left Margin
Once one of these margins has been selected, the user can scroll through the valid range
of values for that margin. Press Select to make the displayed value the current setting.
However, unlike most menus, instead of immediately exiting this level of menus, the
printer firmware first prints a Quick Test page from the appropriate paper tray to
demonstrate the effect of the new margin setting.
Note: The printer attempts to print the Quick Test page from the paper source for which
the registration adjustments are currently being made. The page consists of alignment
diamonds, horizontal lines used for skew adjustment, the page count setting, printer serial
number, code levels, and print registration settings. The Power indicator also blinks while
the page is printing.
When the Quick Test has successfully printed, the display returns to the prior level of the
menu. The user must press Select again before adjusting that margin setting any further.
As with other menu items, pressing Return returns to the prior level of the menu.
To Next Page
Loading...
