2-2 Service Manual
4025-XXX
Status Screens
Each of these message screens provide the operator with information on the current state
of the printer. Each screen of information provides various status information.
Each status screen includes the capability to display a warning message.
Ready
The above is a representation of the operator panel when the printer is in the Ready
state. The printer is ready to receive and process data from a host system.
Status Messages
These messages provide the operator with information on the current state of the printer.
Generally, no user intervention is required.
Service Messages
These messages are displayed whenever the printer is in the Operator Intervention state,
and the printer needs servicing. In general, service errors are non-recoverable. However,
it may be possible to power the printer off and back on to temporarily recover from the
error condition if it is intermittent in nature.
When a Service Message occurs, the printer stops printing. The only recovery is to power
off the printer.
Attendance Messages
These messages are displayed when the printer is in the Operator Intervention state. The
operator is provided with a description of the operator intervention condition.
When an operator intervention condition occurs, all host links will be notified about the
intervention required condition.
All timeouts will be stopped while the printer is in an operator intervention state. The only
exception is the PostScript Feed Timeout. This timeout will be started when the Load
Paper message is displayed for the manual source.
Ready
<warning>
Ready <fax status>
<warning>
Ready Screen Ready/Fax Screen
To Next Page
Loading...
