Loading the multipurpose feeder
53
Printing
2 Pull the tray extension out.
Note: Do not place objects on the multipurpose feeder. Also, avoid pressing down or applying excessive
force on it.
3 Slide the width guides to the outside of the feeder.
4 Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or crease the print media.
Straighten the edges on a level surface.
5 Load the media in the feeder.
Note: Make sure the print media is below the max fill line. Overloading may cause jams.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
